 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 74V1G384 SINGLE HIGH SPEED BUS SWITCH s s s s s s HIGH SPEED: tPD = 0.5ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 1A(MAX.) at TA=25C LOW "ON" RESISTANCE at VCC=5.0V: RON= 7 (TYP), VIN=0V, II/O=30mA RON= 14 (TYP), VIN=2.4V, II/O=15mA OPERATING VOLATGE RANGE: VCC (OPR.) = 3.0V TO 5.5V 5V TOLERANT ON CONTROL PIN HIGH NOISE IMMUNITY: VNIH = VNIL = 28% VCC (MIN.) SOT23-5L SOT323-5L ORDER CODES PACKAGE SOT23-5L SOT323-5L T&R 74V1G384STR 74V1G384CTR DESCRIPTION The 74V1G384 is an advanced high-speed CMOS SINGLE HIGH SPEED BUS SWITCH fabricated in silicon gate C2MOS technology. It's designed to operate from 3V to 5.5V, making this device ideal for portable applications. It's offers 7 Resistance typical value at VCC=5V. Additional key feature are fast switching speed (tON=3.8ns, tOFF=3.3ns Typical) and Low Power Consumption. The OE input is provided to control the switch; the switch is ON when the OE input is held low and OFF when OE is held high. It's available in the commercial and extended temperature range in SOT23-5L and SC-70-5L package. PIN CONNECTION AND IEC LOGIC SYMBOLS April 2004 1/9 74V1G384 INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN N 1 2 4 3 5 SYMBOL I/O O/I OE GND VCC NAME AND FUNCTION Independent Input/Output Independent Output/Input Enable Input (Active HIGH) Ground (0V) Positive Supply Voltage TRUTH TABLE OE L H * High Impedance State SWITCH FUNCTION ON OFF * ABSOLUTE MAXIMUM RATINGS Symbol VCC VI VIC VO IIK IIK IOK IO Supply Voltage DC Input Voltage DC Control Input Voltage DC Output Voltage DC Input Diode Current DC Control Input Diode Current DC Output Diode Current DC Output Current Parameter Value -0.5 to +7.0 -0.5 to VCC + 0.5 -0.5 to +7.0 -0.5 to VCC + 0.5 20 - 20 20 50 50 -65 to +150 300 Unit V V V V mA mA mA mA mA C C ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. RECOMMENDED OPERATING CONDITIONS Symbol VCC VI VIC VO Top dt/dv Supply Voltage Input Voltage Control Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time (note 1) VCC = 5.0V Parameter Value 3 to 5.5 0 to VCC 0 to 5.5 0 to VCC -55 to 125 0 to 20 Unit V V V V C ns/V 1) VIN from 30% to 70% of VCC on control pin 2/9 74V1G384 DC SPECIFICATIONS Test Condition Symbol Parameter VCC (V) 2.0 3.0 to 5.5 2.0 3.0 to 5.5 3.0 VIC = VIL VI/O = GND II/O 30 mA VIC = VIL VI/O = GND II/O 30 mA VIC = VIL VI/O = 1.5V II/O 15 mA VIC = VIL VI/O = 2.4V II/O 15 mA VOS = VCC to GND VIS = VCC to GND VIC = VIL VIC = 5.5V or GND VI = VCC or GND TA = 25C Min. 1.5 0.7VCC 0.5 0.3VCC 9 Typ. Max. Value -40 to 85C Min. 1.5 0.7VCC 0.5 0.3VCC 13 Max. -55 to 125C Min. 1.5 0.7VCC 0.5 0.3VCC 20 V V Max. Unit VIH High Level Input Voltage Low Level Input Voltage ON Resistance VIL RON 4.5 7 10 15 RON ON Resistance 3.0 20 40 60 4.5 14 28 40 IOFF Input/Output Leakage Current (SWITCH OFF) Control Input Leakage Current Quiescent Supply Current 5.5 0 to 5.5 5.5 0.1 0.1 1 1 1.0 10 10 1.0 20 A A A IIN ICC AC ELECTRICAL CHARACTERISTICS (CL = 50pF, Input tr = tf = 3ns) Test Condition Symbol Parameter VCC (V) 3.3 5.0 tPLZ tPHZ Output Disable Time (*) Value TA = 25C Min. Typ. 0.8 0.5 8.5 3.8 7.3 3.3 Max. 1.2 0.8 12.0 6.5 12.0 5.0 -40 to 85C Min. Max. 1.5 1.0 14.0 9.0 14.0 7.5 -55 to 125C Min. Max. 2.0 1.5 16.0 10.0 16.0 ns 8.5 ns ns Unit tPD Delay Time tr = tf = 6ns tr = tf = 6ns R1 = 500 VIN=1.5V R1 = 500 VIN=2.4V R1 = 1K VIN=1.5V R1 = 1K VIN=2.4V (**) 3.3(*) 5.0(**) 3.3(*) tPZL tPZH Output Enable Time 5.0(**) (*) Voltage range is 3.3V 0.3V (**) Voltage range is 5.0V 0.5V 3/9 74V1G384 CAPACITIVE CHARACTERISTICS Test Condition Symbol Parameter VCC (V) TA = 25C Min. Typ. 4 7 3.3 5.0 2.5 3 pF Max. 10 Value -40 to 85C Min. Max. 10 -55 to 125C Min. Max. 10 pF pF Unit CIN CI/O CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (note 1) 1) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC 4/9 74V1G384 SOT23-5L MECHANICAL DATA mm. DIM. MIN. A A1 A2 b C D E e H L 2.60 0.10 0.90 0.00 0.90 0.35 0.09 2.80 1.50 0.95 3.00 0.60 102.3 3.9 TYP MAX. 1.45 0.10 1.30 0.50 0.20 3.00 1.75 MIN. 35.4 0.0 35.4 13.7 3.5 110.2 59.0 37.4 118.1 23.6 TYP. MAX. 57.1 3.9 51.2 19.7 7.8 118.1 68.8 mils . 7049676C 5/9 74V1G384 SOT323-5L MECHANICAL DATA mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.10 0.80 0.00 0.80 0.15 0.10 1.80 1.80 1.15 0 .65 1.3 0.30 3.9 TYP MAX. 1.10 0.10 1.00 0.30 0.18 2.20 2.40 1.35 MIN. 31.5 0.0 31.5 5.9 3.9 70.9 70.9 45.3 25.6 51.2 11.8 TYP. MAX. 43.3 3.9 39.4 11.8 7.1 86.6 94.5 53.1 mils 6/9 74V1G384 Tape & Reel SOT23-xL MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.13 3.07 1.27 3.9 3.9 3.23 3.17 1.37 4.0 4.0 12.8 20.2 60 14.4 3.33 3.27 1.47 4.1 4.1 0.123 0.120 0.050 0.153 0.153 0.127 0.124 0.054 0.157 0.157 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.131 0.128 0.0.58 0.161 0.161 0.512 MIN. TYP. MAX. 7.086 0.519 inch 7/9 74V1G384 Tape & Reel SOT323-xL MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.9 3.8 2.25 2.7 1.2 4 4 4.1 4.2 0.153 0.149 175 12.8 20.2 59.5 60 60.5 14.4 0.088 0.106 0.047 0.157 0.157 0.161 0.165 TYP 180 13 MAX. 185 13.2 MIN. 6.889 0.504 0.795 2.362 0.567 TYP. 7.086 0.512 MAX. 7.283 0.519 inch 8/9 74V1G384 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners (c) 2004 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 9/9 |
Price & Availability of 74V1G384STR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |